Redmi Go (Tiare) Flash File Download (Official Stock ROM) 100% Tested
Redmi Go Flash File (Stock ROM)
Redmi Go (Tiare) Flash File Download (Official Stock ROM) 100% Tested
The Redmi Go, codenamed "Tiare", is Xiaomi's first Android Go edition smartphone. Despite its optimized software, users often encounter issues like "System UI has stopped," bootloops, or FRP locks. To resolve these, you need the official Redmi Go Stock ROM (Firmware).
In this guide, we provide the 100% tested and original firmware for Redmi Go. This file will help you restore your device to its factory-fresh state and fix any software-related errors.
Common Issues This Firmware Can Fix:
Bootloop Fix: If your phone is stuck on the "Mi" logo during startup.
Remove Screen Locks: Clears forgotten patterns, PINs, or passwords.
Bypass FRP: Helps in resetting the device after a factory reset if you forget your Google account.
Fix System Damage: Repairs corrupted system files and software glitches.
Unbrick Device: Recovers the phone if it has been "soft-bricked" during a custom ROM installation.
Bootloop Fix: If your phone is stuck on the "Mi" logo during startup.
Remove Screen Locks: Clears forgotten patterns, PINs, or passwords.
Bypass FRP: Helps in resetting the device after a factory reset if you forget your Google account.
Fix System Damage: Repairs corrupted system files and software glitches.
Unbrick Device: Recovers the phone if it has been "soft-bricked" during a custom ROM installation.
Redmi Go Technical Specifications
| Specification | Details |
| Device Name | Redmi Go |
| Codename | Tiare |
| CPU Chipset | Qualcomm Snapdragon 425 |
| Android Version | Android 8.1 (Oreo - Go Edition) |
| File Type | Fastboot ROM (.tgz) |
| Flash Tool | Mi Flash Tool / QFIL |
| Status | 100% Tested & Official |
Prerequisites Before Flashing
Qualcomm USB Drivers: You must install the Qualcomm HS-USB QDLoader 9008 Drivers on your PC.
Battery Charge: Maintain at least 50% battery to ensure the process isn't interrupted.
Bootloader: For Fastboot flashing, an Unlocked Bootloader is required. (For locked bootloaders, use EDL Mode).
Backup: Flashing will erase all internal data. Please take a full backup.
Qualcomm USB Drivers: You must install the Qualcomm HS-USB QDLoader 9008 Drivers on your PC.
Battery Charge: Maintain at least 50% battery to ensure the process isn't interrupted.
Bootloader: For Fastboot flashing, an Unlocked Bootloader is required. (For locked bootloaders, use EDL Mode).
Backup: Flashing will erase all internal data. Please take a full backup.
How to Flash Redmi Go (Step-by-Step Guide)
Step 1: Download & Extract
Download the Redmi Go Fastboot ROM and extract the .tgz file using WinRAR. Place the folder on your Desktop for easy access.
Step 2: Enter EDL Mode (Emergency Download Mode)
Since Redmi Go uses a Qualcomm chipset, you often need to put it into EDL Mode (9008).
Turn off the phone.
Use the Test Points (shorting the two gold points on the motherboard) while connecting the USB cable to the PC.
Your PC should detect it as "Qualcomm HS-USB QDLoader 9008."
Step 3: Launch Mi Flash Tool
Open the Xiaomi Mi Flash Tool as an administrator. Click "Select" and browse to your extracted ROM folder.
Step 4: Select Flash Mode
At the bottom of the tool, select "Clean All" to ensure a fresh and error-free installation.
Step 5: Start Flashing
Click "Refresh" to see your device in the list. Finally, click "Flash." The process will take about 3-5 minutes.
Step 6: Completion
Once the status bar turns green and shows "Success," disconnect the phone and turn it on. The first boot may take 5–10 minutes.
Conclusion
Using the official Redmi Go (Tiare) Stock ROM is the most reliable way to maintain your device's health. Always ensure you are using the correct region firmware (Global/India/China). If you encounter any "Error 0x80004005," try moving the ROM folder to the root of your C: drive.
Disclaimer: Flashing firmware involves risks. We are not responsible for any internal hardware damage. Proceed with caution.